How to select a high pressure PVC hose
Sandblast hoses now widely serves in more and more places. In the process of using the sand blaster hose, it is likely to scratch due to improper use. Besides, it may get hurt during the movement. Then how to prevent the sand blast hose from break? Here we Orientflex offer you some suggestions.
Focus on the sandblast hoses storage
First, when storing the sandblasting hose, do not put the it directly on the ground. Instead, take some protective measures. For example, use some items to block it. While during the sandblast work, do not drag the abrasive blast hose on the ground. Because there may be a lot of gravel or hard objects on the ground. Then these may damage and wear the sandblaster hose.
Second, blasting hose must not be in direct contact with other hard objects. Because the sandblasting hose uses high quality raw materials. Then direct contact with hard objects is likely to cause wear.
Third, you must store the sandblasting pipes well. On the contrary, never place the hose randomly. Do a good job of spacing the blasting hose and store the it separately. This not only prevents friction, but also good to sales and shipment.
Last, the storage place of the pipe blast should be clean. Besides, there should not be sharp objects such as glass. Because these can contact with the shot blasting hose and damage it.
The sandblast hose and nozzle installation is also important
In the repair process, you must do that with right method. Be careful not to come into contact with any hard objects during operation. Because this is also easier to cause scratches.
Sand blasting hose belongs to consumables. Thus you should focus on above factors to store and install the hose. Then you can save much cost.
Orientflex hose is a reliable choice for your work. Contact us now and get more details.
Related posts
