High Temperature resistant fire sleeve widely serves in petrochemical industry
Hydraulic oil hose fittings are important parts to connect hydraulic hose. It is in various hydraulic systems to connect, transfer pressure and transmit fluid. There are many types of hydraulic pipe joints and let me introduce some of them in detail below.
Flange is a one of hydraulic oil hose fittings
Flange is a common hydraulic oil pipe joint. While it is ideal for high pressure and large diameter pipeline. The flange connection has a simple structure and is easy to install and disassemble. While you only need to tighten the two flanges with bolts. There are many standards for flange, such as American type, European type, etc. The size, number of bolt and diameter are different among them. Thus you should pay more attention when you choose the flanges.
Hydraulic hose ferrule
Ferrule is a light duty hydraulic oil pipe joint. Thus it is ideal for low pressure and small diameter hose. The structure of the ferrule is simple, including pipe end ferrule, gasket, clamp and other parts. When you install it, you only need to tighten the clamps. The ferrule is suitable for the use that the sealing requirement is not that high. But you should take care it in the high temp, high pressure and corrosive conditions.
Oil pump connector
The oil pump joint is an important part that connects the oil pump and the oil pipe. Its structure is complex and consists of multiple parts. There are many types of oil pump joints, such as single head, double head, three head, etc. While each one is ideal for the special use.
Above are three common hydraulic oil hose fittings. But in fact, there are many other types. So if you want to learn more, just follow Orientflex. Then you can get more helpful information about hoses and couplings.
Related posts
