Now we have done the Aeration Hose more than 20 years with over 30 countries.
Below is some information about our hose.
1. Aeration Hose Construction
2. Aeration Hose size list
Outer diameter: 10-28mm
Wall thickness: 2mm above
The bubble diameter: 20-50um
Dynamic power: 02 / kw. Hr
The air flow: 3-12 cubic meters/HRM
Applicable water depth: 0-6 meters
3. Aeration Hose Usage
Used to make the dissolved oxygen in the water reach higher amount and
enhance the air density. Apply to aquaculture, sewage treatment, garden
4. Aeration Hose properties
1）Micro-hole arrangement density: 1000-1600 pieces/m
2）Bubble diameter: 0.3-2mm (fresh water) 0.5-3mm (sea water) There are certain changes according to the water viscosity and water level.
3）Effective aeration volume: 0.002-0.006m³/min.n
4）Air flow: 0.1-0.4m³/h.m
5）Service area: 1-8m²/m
6）Supporting power: ≤0.40kpa per 1kw=100m, underwater loss ≤5kp
7）Appropriate configuration: motor power 1kw supporting 100-150m microporous aeration pipe
8）Power efficiency: the power consumption per mu is only 0.15kw, and the amount of dissolved oxygen is guaranteed to reach more than 5mg/L.
Orientflex, the quality hose serve the world.
If you need some hose, please feel free to contact with us.