rubber air hose

The rubber hose development in China

Rubber hose and belt are 2 important rubber products. They widely serves in mining, auto, etc. And it can be replaced so far. Since the found, especially since the reform and opening up, rubber hoses and belt industry have made great progress. At present, our hose rubber and belt can not only meet the needs…

Details
PU Steel Wire Duct Hose (2)

What should consider when use a PU duct hose

PU vacuum hose is a branch of industrial vacuum hose. It widely serves in many apps because of the great properties. But the use of any hose has a specific range. PU vacuum hose generally serves in industrial for dust collect, wood work, ventilation without corrosive oil. While in the daily use, you should focus…

Details
PVC steel wire hose

PU Steel Wire Hose Can Be Both Industry And Food Use

PU steel wire hose is a new type of hose. While it can be both industry and food use. In industry, it can deliver water, oil, powder, chemical and particle. While for food use, it is mainly to transfer juice, milk, drinking water, wine and bear. The PU steel wire hose is made from high…

Details
PVC air hose

How to correctly use the plastic hose

When we buy PVC hoses, many users think that as long as they meet the use. But they don’t care much about the specific factors for the use of the hose. Then it leads to a short service life of the hose. Then let me show you some factors to focus on when use a…

Details
TPU hose for agriculture

Features of TPU hose

Wear proof TPU hose Taber wear value is 0.35-0.5mg, which is the smallest among plastics. Besides, add lubricant can reduce friction, thereby further improve wear ability. Tensile strength The tensile strength of TPU is 2-3 times that of natural rubber and synthetic rubber. The tensile strength of polyester TPU is 60Mpa and the elongation is…

Details
metal hose

How to cut a reinforced metal hose

In the last piece, we learned the cutting property of a reinforced metal hose. While in this piece, let’s learn how to cut the flexible metal hose. The cutting process Scraper milling blades must not thin the outside surface of the hose. When using slider pieces, the thickness of the cut hose should be specified.…

Details